Are you trying to find a comprehensive setup manual for the Canon MG3620 printer? If so, here is the ideal section to read through since it covers how to set up the Canon MG3620 utilizing a USB cable, a Wi-Fi network, and a WPS connection. You can quickly and easily set up your Canon printer by following the simple steps.
The Canon MG3620 is an inexpensive and practical all-in-one inkjet printer. All devices, including Windows, Mac, iOS, and Android, are compatible with it. Additionally, it has the ability to print wirelessly over a Wi-Fi network. Overall, this inexpensive printer is the best option for printing at home and in the offfice.
Canon MG3620 Printer Wireless Setup For Windows
It’s easy to connect the Canon MG3620 to your Windows computer using a Wi-Fi network. This guide will help you configure your Windows PC’s Canon MG3620 wireless printer.
- Make sure the Canon MG3620 printer is turned on before you begin.
- Press the “Stop” button to switch off the Wi-Fi if it is active.
- On the printer’s control panel, press and hold the Wi-Fi button until the Wi-Fi lamp begins to blink.
- Press and hold both the “Color” and “Wi-Fi” buttons simultaneously while the lamp flashes. Verify that the WiFi light is on and off
- The printer driver needs to be downloaded and installed on your computer.
- Place the included CD inside the CD ROM and launch Setup.
- If you can’t find the driver’s CD, you can download it from Canon’s official website.
- Choose “Windows” as your operating system after locating the printer.
- Run the setup after that, then select “Yes” to continue.
- Choose “Start Setup” from the following screen.
- After selecting “Wireless LAN Network” under “Select Connection Method,” hit “Next.”
- After choosing your home nation, press the “Next” button.
- You’ll then notice “Terms and Conditions.” After reading them, click “Accept.”
- You must choose your printer from the list that is provided.
- On the “Setup Complete” screen, choose your WiFi, enter its password, and click “Next”.
- The driver installation will now get underway. The process takes a while to complete.
- To complete the setting, press the “Exit” button.
- It appears that the Canon MG3620 wireless installation on Windows is now complete. As a result, you may enjoy printing documents and photos to your Canon printer via a Wi-Fi network.
Canon MG3620 Printer Setup with USB Cable
Use a USB cable to connect the Canon MG3620 printer to your computer by following the instructions provided. Make sure you have long, high-quality USB cords ready before continuing.
- Make sure the printer is off before re-plugging the power cable and inserting it. The alternative is the risk of an explosion.
- A USB cable should have one end plugged into the printer’s port and the other end into your computer.
- Next, press the printer’s “Power” button to turn it on.
- When the Printer name shows up on your screen, click on it.
- Use a web browser to access the printer driver’s official website and download it.
- The printer setup instructions are displayed on the screen.
- The printer setup for the Canon MG3620 would have been competitive by the end of the last round.
- Check now to see if the Canon printer is prepared for printing.
Canon MG3620 Printer Setup with WPS Connection
Apart from the direct method, you can configure it to connect to any Windows or Mac computer using a Wi-Fi router and your Canon printer. To configure the Canon MG3620 on your computer using a Wi-Fi router, follow the instructions below.
- Verify the Wi-Fi router’s WPS button before proceeding.
- WPA or WPA2 must also be used by the WiFi router.
- Next, make sure the Canon printer is turned on.
- Click the Wi-Fi button on the printer’s control panel until the blue light begins to blink.
- Navigate to the WiFi and press the WPS button. To make sure it’s linked, you have to hold the button down for a few minutes as least.
- The printer is looking for available networks when its Wi-Fi light flashes.